WaterSource
Large-Scale AOP Systems
AOP-350 & AOP-650 — Combined Ozone and UV Treatment for Pool Circulation Systems
The WaterSource AOP-350 and AOP-650 combine ozone and ultraviolet (UV) treatment to generate hydroxyl radicals for the oxidation of organic contaminants in water.
Designed for integration into swimming pool circulation systems, these units provide an additional treatment stage alongside filtration and primary disinfection.
Key Features
Combined Ozone & UV Treatment
Combines ozone and UV to generate hydroxyl radicals that oxidize organic contaminants in water.
316 Stainless Steel Reactor
The reaction vessel is constructed from 316 stainless steel.
Multi-Stage Ozone Mixing
A multi-stage gas–water mixing system brings ozone into contact with the water in the treatment stream.
Siemens PLC Controls
A Siemens programmable logic controller manages system operation through a multilingual interface.
Ozone Leak Detection
An ozone leak alarm alerts operators when an ozone leak is detected.
Off-Gas Ozone Destruction
An ozone destructor treats residual ozone in the system’s off-gas.
System Selection
The reference pool water volume is 350 m³ for the AOP-350 and 650 m³ for the AOP-650.
Contact WaterSource to confirm model suitability based on your pool’s circulation flow, proposed bypass flow, water quality and treatment objectives.
Project Information
To help us recommend a model, please provide:
- Pool type and water volume
- Total circulation flow rate and proposed AOP bypass flow rate, if known
- Existing filtration and disinfection equipment
- Available water quality test results and treatment objectives
- Equipment room layout and available electrical supply
Technical Specifications
AOP-350
Reference Pool Water Volume: 350 m³
Bypass Flow Rate: 12.5 m³/h
Ozone Output: 12.5 g/h
Feed Gas Flow Rate: 5 L/min
Power Consumption: 1.89 kW
Electrical Supply: 110 V AC at 60 Hz or 230 V AC at 50 Hz
Dry Weight: 180 kg
Water-Filled Weight: 380 kg
AOP-650
Reference Pool Water Volume: 650 m³
Bypass Flow Rate: 25 m³/h
Ozone Output: 25 g/h
Feed Gas Flow Rate: 10 L/min
Power Consumption: 3.69 kW
Electrical Supply: 110 V AC at 60 Hz or 230 V AC at 50 Hz
Dry Weight: 220 kg
Water-Filled Weight: 520 kg
Installation & Maintenance
Before installation, confirm the bypass piping layout, water connections, electrical supply and service clearances for the selected model with WaterSource.
Follow the installation, operation and maintenance instructions supplied with the equipment. Contact WaterSource for maintenance and replacement parts information.
Diagrams are for illustration only. Confirm the piping layout for your project with WaterSource.
Find the Right AOP Model
Contact WaterSource to discuss the AOP-350 and AOP-650, review your pool circulation layout or request a project quotation.